Author: mlk support

Proper installation and maintenance of electricity and lighting in our building guarantees optimal and correct operation, as well as providing the necessary comfort to its owners. Many communities are still wasting more energy than they need and are not getting the service they demand. Therefore, we tell you about the advantages of having electricity maintenance in a neighborhood community.

Undoubtedly, the electrical installation inside a residential building has to be kept in a good state of preservation, which will guarantee an adequate level of safety for the occupants and will be a necessary procedure for our electrical company to install the new ones without problems. digital counters or that we can pass the inspections established by law.

The company we choose must be certified in electrical work that performs reliable work. with written guarantees and a standardised process of working, since a poor condition of the facilities can be the source of a great danger for the entire community, something that we can afford.

But it is not only a process related to the security of a good installation, its maintenance requires equal or greater importance to prevent problems or failures and, above all, save on electricity through a system of proximity sensors, low consumption lights, with LED technology (downlight for corridors and common areas).

Trusting any professional who can perform electrical work can be very expensive if we do not choose a good supplier carefully. This is Westwire Electrics, the leading provider of specialised electrical maintenance services to ensure all electric installations in family buildings and commercial facilities are working at full performance level.

What problems can proper maintenance of electrical equipment prevent?

• Fires: 22% of building fires are due to failures in electrical installations. We can reduce its incidence by carrying out appropriate maintenance or have experts to carry out adequate repairs to prevent possible failures. Most of the old buildings (over 30-40 years old) have installations with non-compliance with the Low Voltage Regulation, which causes overloads, short circuits and, subsequently, a possible fire.
• Power outages: any failure produces power outages, both inside our houses and in the common areas of the building. This produces discomfort, such as the inactivity of elevators, video surveillance cameras out of service, non-operational door entry systems or manual opening of garage doors.
• Voltage rises and falls: who has not experienced voltage rises or falls in their homes. It also happens in our building, damaging the installed electrical equipment. To protect the equipment, it is important to place differentials. Consult your trusted technician for advice.
• Costs: when the incidents mentioned in the previous points occur, they entail the respective costs to repair the electrical system and the damages it has caused. The energy wasted by incandescent or timer LED systems can be reduced with a new installation of saving systems.

Advantages of having professional electrical maintenance in a neighborhood community

Safety

A correct electrical and periodic maintenance, we can keep the installation always controlled and anticipating possible errors that contribute to major incidents, such as the aforementioned, fires, cuts… Having the equipment with the best conditions provides security in the electrical network, in addition to offering greater performance on the network.

Maintenance is used to analyse, review, control, repair and clean electrical and lighting equipment. It is necessary to see if there are worn cables, broken plugs, how are the lines; all this to guarantee the protection of a community.

Saving

One mistake is to think that hiring electrical maintenance in a neighborhood community does not create any savings, but saving maintenance and trouble occurring will further increase costs. Evaluate the inconvenience and its cost and you will see that having this service, which can also be grouped with other maintenance, is a great saving.

Repairs, damage to facilities, homes, etc. they are costs that we can save on time with the appropriate revisions. A maintenance program lengthens the life of our equipment, gives greater performance, in addition to reducing energy consumption.

Professionals

It is necessary to comply with current legislation and, for this, we must always have a team of electricity professionals specialised in communities who can advise us, carry out the installation correctly and provide a review service to keep it working properly.

Written guarantee, possibility of financing, monitoring of quality standards and proper management of the good treatment of our client are some of the points that our team offers.

Safety is important and only specific personnel can meet the needs of maintaining the longest active and electrified time in the neighborhood community.

The Importance of Commercial Electrical Maintenance

Commercial electrical maintenance can be seen regularly as annoying and unnecessary expense; however, skipping this step or just meeting the minimum requirements can backfire. It is important to remember that an electrical system can be highly dangerous if it is not in optimal conditions to safeguard the integrity of customers and employees alike. With this in mind, below we discuss the importance of commercial electrical maintenance and the risks of not carrying it out:

Productivity risk: Unplanned downtime and decreased performance

Commercial electrical installations are naturally complex, so the failure of a single component may be sufficient to cause failure. This small incident could have a ripple effect on the entire system and cause widespread damage.

Equipment breakdowns, power surges, and power failures require very expensive repairs and replacement parts, but this is not the only cost to the business. Lost productivity and the need to shut down to carry out the repair can be deadly for the company. Preventive electrical maintenance will detect small problems before they become apparent, thus preventing further damage.

Unfortunately for many communities, there are unqualified companies or professionals on the market to do these jobs and may encounter problems stemming from excessive savings or choosing without adequate guarantees.

Westwire Electrics is an installation and maintenance company that has its corresponding approval in electricity, in addition to having only professional technicians who can advise and perform a good electrical service.

This time we tell you some useful tips to make electrical cables installations at home and not make mistakes that can result in short circuits, injuries or fires.

If you have any questions, Westwire Electrics has qualified personnel to advise you and provide you with everything you need for your electrical installations, contact us by clicking here

1. Make connections without electrical boxes

Error: Not using an electrical box

Cables should never be connected outside of electrical boxes.

Of the many errors with electrical installations, this one is extremely dangerous as any spark or heat generated will not be contained. Definitely a latent fire hazard.

Solution: Add an electric box

To prevent electrical hazards when the connections are not contained in an electrical box, you must disconnect them, install the electrical box, and reconnect the cables within it.

The electrical boxes just protect the connections from accidental damage and contain sparks and heat from a loose connection or a short circuit.

2. Cable cut too short

Error: Cables too short.

Cables that are cut too short make wire connections difficult, extremely difficult to handle, and dangerous since the connections are likely to be poorly made.

Solution: Extend the wires

Cables should extend approximately 3 inches out of the box.

Adding connectors makes it possible to extend the cables, you should make sure that the screws on its connector are tight.

You could also add 6 inches by making extensions on existing cables.

3. Leaving the cables with plastic cover unprotected

Error: Cable not protected.

Plastic sheathed cables are easily damaged.

That is why all cables for electrical installations must be protected, particularly in vulnerable areas such as when running on or under the wall or ceiling frame.

Solution: Install a 2 x 2 adapter.

Protect the exposed plastic-coated cable by nailing or screwing in a 1-1 / 2 in. Plate. thick along the cable. Do not staple the cable to the card.

4. Overload of electrical boxes

Error: Box too small.

Too many cables packed in a box can cause dangerous overheating, short circuits, and fire.

There are regulated minimum box sizes to reduce this risk.

Solution: Install a bigger box.

To calculate the minimum required box size, add the items in the box:

1 – for each hot wire and neutral wire entering the box

1 – for all combined ground cables

1 – for all combined cable clamps

2 – for each device (switch or output, but not lighting accessories

The total must be multiplied by 2.00 for 14-gauge wire and 2.25 for 12 gauge wire to obtain the minimum required box size in cubic inches. Then choose a box with at least this volume. Plastic boxes have the volume stamped on the inside, usually on the back.

5. Reversal of live and neutral cables

This is one of the most common electrical installation errors. Currently, outlets are color-coded.

The bronze color is for live or black cables and the silver color is for neutral or white cables. Connecting the black wire to the neutral terminal of an electrical outlet creates the potential for lethal shock.

The problem is that you don’t realize the error until someone is surprised, because the lights and most other plug-in devices will still work.

They just won’t work for sure.

Solution: Identify the neutral terminal

Always connect the white wire to the neutral terminal of outlets and lights.

The neutral terminal is always marked. It is usually identified with a silver or light-colored screw.

6. Recession of the boxes behind the wall surface

Error: Exposed combustible materials

Electrical boxes must be flush with the wall surface if the wall surface is a combustible material.

Boxes embedded behind materials such as wood present a fire risk because the wood is exposed to potential heat and sparks.

Solution: Add a box extension

The solution is to simply install a metal or plastic box extension.

If a metal or plastic box extension is used, connect the metal extension to the ground wire in the box using a grounding clip and a short piece of wire.

7. Inadequate support for sockets and switches

Error: Loose output.

Loose switches or plugs don’t just look bad aesthetically, worse, they’re dangerous.

Loose power outlets can move, causing cables to loosen from terminals. Loose cables can burn and overheat, creating a potential fire hazard.

Solution: Add rigid spacers.

Secure the loose plugs by wedging under the screws to create a tight connection to the box. Special spacers are available in lighting houses or hardware stores.

8. Installing a three-slot outlet without a ground wire.

Solution: Install a two-slot outlet

It happens that if we have two-slot plugs we tempt ourselves by replacing them with three-slot sockets so you can connect three-pin plugs. But do not do this unless you are sure there is available land.

Use a tester to see if your outlet is grounded. A series of lights indicate if the outlet is connected properly or what is wrong.

These testers are available at lighting houses and hardware stores.

9. Installing a GFCI Backwards

Among the errors with electrical installations, the most common when installing GFCI is to mix the line and load connections.

The outlet will work, but will not activate if there is a ground fault.

Solution: Connect the power to the “line” terminals

GFCI (Ground Fault Circuit Interrupter) outlets protect you from a fatal shock by turning off the power when they sense slight current differences. They have two pairs of terminals. One pair, labeled “line”, for incoming power from the GFCI output itself. The other set is labeled “load” and provides protection for downstream outlets.

And finally, always remember to turn off the switch before working on any electrical circuit and if you are unsure how to fix problems with electrical installations, call a qualified electrician.

We are Westwire Electrics, a third-generation electrical cables contracting company proud of offering businesses and house owners in Melbourne an option to increase profitability with the installation and maintenance of second to none equipment with advanced technology.

 

On this occasion, we are going to introduce you to the 5 steps to polish and varnish a wooden floor, either for your own home, for your office or business. It is evident that many people have the preconceived idea that this work is quite complex, the truth is that the method is much simpler than you may think, and you only need to have some tools and machinery for polishing and materials, such as varnish, which is required for this task.

Walk On Wood is a proud family business with over 20 yeas of experience in the flooring industry. If you are thinking of installing timber flooring in your house or commercial building, contact us now.

It is obvious that you have to dedicate the necessary time to obtain a good result. So, if you think you can dare to do this job, pay close attention to these steps.

1. First step before starting this task

The first step before starting to work on this is to have all your relatives living in your house or apartment ready to tolerate the dust that comes from polishing the floor, and once the polyurethane varnish has been applied, you have to wait for it to dry very well. The quality of the polyurethane varnish is that it can be used on all types of wooden floors, parquet or parquet.

2. Materials needed for the job

You must have the following materials for when you start the work on the ground. You will need to: A floor polisher, edge and corner polisher, a powerful vacuum cleaner, a scraper, a paint scraper, a set of gouges, a smooth plastic spatula, polyurethane varnish cans and various varnish brushes.

3. Let’s start working on it

In order to start doing this, you have to remove the furniture from the space that you are going to polish and varnish, if the house is inhabited you must do the work space to space. Then seal the doors with plastic so that the dust does not come out. Then check the condition of the wooden floor, removing all scratches when you go to polish.

4. Sand the floor

Glue the boards that are loose and fill in the holes. Start polishing with a roller polishing machine, where you put the sandpaper, and it will rotate at high speed to polish the floor, first you have to put a coarse sandpaper of 80, then a medium sandpaper of 100, and finally, a fine sandpaper of 150. Pass the polisher from end to end of the space so that no sanding gap is created. To improve the finishes, use an edge polisher.

5. For the results, wait 48 hours

Vacuum the dust and start applying the first layer of polyurethane varnish that you must let dry for 24 hours. Once dry, with a very fine sandpaper of 400, polish the floor again. Once this is done, you will have to dilute the polyurethane varnish with a maximum of 10% mineral turpentine and apply two more coats to the floor. Between hands, you must let it dry for 24 hours and remove the fluff with a very fine sandpaper of 400. You have already finished the job, but you must allow three more days to put the furniture and walk through the space.

7 mistakes that are ruining your hardwood flooring

Hardwood floors are among the most attractive, but at the same time also the one that requires the most care. If you have these in your home, avoid these common mistakes that can be ruining your wood floors.

1. Leaving the floor soaking wet when cleaning it

Today’s hardwood floor finishes are much more waterproof than in the past, but that doesn’t mean you can flood your floors with a cleaning solution. When it’s time to wash floors, do it in small areas each time with a damp, not wet, cloth or mop, and dry it as soon as possible.

2. Not being careful with sharp objects

You probably already know that hardwood floors and sharp objects don’t mix, but there are two things we often forget: pet claws and high-heeled shoes. Solve this problem by keeping your pet’s nails trimmed and leaving your shoes on the doorstep.

3. Using a vacuum with a rotating brush

The rotating vacuum brush can be very abrasive to hardwood floors. Remove the brush or use a softer brush instead. But be sure to vacuum frequently dirt and gritty dust particles can scratch the floor if they sit too long.

4. Choosing the wrong mat

Rubber base or rubber mesh rugs can leave your floors dull, and even cause discoloration. To protect the floor, use a mat with a combined felt and rubber base, which will keep your rugs in place without damaging the floors.

5. Use the steam cleaner in any way

Be careful when using a steam cleaner. If your floor has a wax finish or if the finish is old and worn, don’t use steam to clean. For other finishes, make sure the floor is intact before doing so. Use the lightest level of steam offered by your device and keep it moving on the floor, avoiding leaving it anywhere too long.

6. Washing the floors too often

Unless your hardwood floors get tons of foot traffic, you don’t need to wash them with a damp cloth more than every one to two months. Instead, vacuum the hardwood floors as much as necessary.

7. Let them sunbathe

Sun exposure can change the color of wood floors. Keep blinds or curtains drawn when the sun is strongest to limit fading and dry wood finish.

At Walk On Wood, take pride in our work and only use top quality products to ensure our work in timber floor installation, sanding and coating is of the best quality. We offer expertise and client satisfaction second to none with personalised and professional service. Contact us today if you want more information.

Many homeowners still don’t know how to clean the hardwood floors to make it shine. If this is your case, we invite you to read this post. Designed specifically for those who care about every tiny area of ​​home cleaning! Make the most of your hardwood floors with these tricks!

Remember that Walk On Wood stays at the top of the list of hardwood floors installations in Australia. Contact us now if you want more information about our services.

Take care of your hardwood from bad cleaning methods

Unfortunately, many methods on the internet have become harmful for hardwood floors! Especially since they use inappropriate products (like vinegar or lemon) to try to clean the wooden floor so that it shines.

Keeping that very much in mind, be very careful with what you use on the hardwood floors. Remember that your wood is a living element as precious as it is delicate. Its natural integrity and beauty will only be appreciated with proper maintenance, without leaving its cleaning lightly.

Does your hardwood floor have several years installed? It may then require sanding and waxing. These techniques are applied depending on the type of finish, thickness and type of wood. One thing that stands out is that such procedures preserve the radiant and shiny wood. And that’s exactly what you are looking for!

The fear of damaging the wood is normal for being a pavement so susceptible to change. Despite this, we can tell you how to clean the wooden floor so that it shines. Read carefully enough. If you have doubts or get lost at any point, don’t hesitate to contact us and ask us.

How to know if my hardwood floor needs sanding?

• You notice that the finish is opaque
• You have lost significant areas of varnish or sealant
• Shows fissures
• Has scratches across a large area
• It is stained with marks that have been indelible (already trying other spotting methods)

Whether or not to go looking for a professional is your decision. The option is viable if you don’t have much time. Or if you cannot easily access the necessary materials and machinery. In any case, opt for a company, instead of a private worker who does not give you guarantees.

Sanding delicate hardwood floors

The first thing you have to do is to leave the wooden floor clear of furniture, so remove all armchairs, rugs and decorative objects and appliances from the floor, move them to another room where they do not get in the way.

In case you want to cover the whole house, it is better to go working by sections or rooms, so you will not have to move the whole family.

Clean the hardwood floor as you always do, with a vacuum cleaner and a special cleaner solution for wood diluted in distilled water.

Dry the floor well and the floor is ready to be polished!

Check that all the nails are well fixed to the ground, if they are not, remove them and replace them with new ones.

After doing that, use a fine-grained and not very abrasive sandpaper for the entire length of the floor.

Apply the sealer and finish.

Next, apply a layer of some varnish, wax, lacquer or sealant based on polyurethane (or that contains resins and catalysts that are the ones that will really give the shine back to the floor).

We recommend that you first identify the finish and consult a professional which is the most suitable sealer for your floor.

You should work diagonally to avoid stepping on the already treated area.

If you are going to spread lacquer or varnish it is better with a brush, for oils it is more convenient to use a roller.

Either way, you should let dry before applying the second coat.

Remember that the waxing must first pour the sealant with the help of a short-haired roller.

Consecutively, the floor is covered with a layer of good quality wax.

Electric polishers greatly outperform waxing, but you can also do it manually with a soft cloth.

Points to consider when deciding whether or not to sand

Although this procedure is very good for how to clean the wooden floor so that it shines, it does not work in all cases! Only, it should be sanded when the floor is badly damaged. Also, you need to check if the floor has ever been treated and the thickness of the wood.

You cannot sand a synthetic floor since it does not have the structure for such treatment. Sanding provides a base for the wood to absorb the product that will shine. It is for that reason that it is so important. Use this alternative as a last resort.

Possibly your floor does not need sanding if it has not completely lost its shine. This being the case, you may apply sealant or varnish with a brush without sanding. It is true that it does not achieve the same level of effectiveness, but it is less expensive and less laborious.

Do you know how to clean the hardwood floor so that it shines regularly?

We went to the most extreme situation where sanding was urgently required. However, not every time the degree of damage to your floor is so intense. Possibly, the blackening is due to bad cleaning habits. Or in the absence of it, due to the presence of dirt or poor-quality cleaner.

Scrub the hardwood floor

Are you noticing a drastic change after a correct cleaning of your wooden floor? We are pleased! That implies that the floor was not so destroyed and gloomy. Despite the achievement, there are still things to do, so keep learning how to clean wooden floors. You will eventually soften the dirt that is embedded.

Scrubbing tips

• Using a bucket and a mop (cotton or soft microfiber) make a warm water solution with a splash of floor cleaner.
• Read the instructions on the back of the bottle very carefully, to understand what measures of cleaner you should use and how to mop the floor.
• Wear gloves and do not forget to pre-test in a small area of ​​the floor that is not visible, for example, under the stairs or in an armchair.
• Dampen the mop in the solution and pay attention to the next tip! Drain it as much as you can!
• In fact, the mop should come out of the bucket only slightly moistened.
• Run the mop across the floor and wait a few seconds.
• After waiting a few minutes, rinse the floor with plain distilled water.
• It ends by drying with a dry mop and if you do it with energy you will see how to shine the floor.
• Discover how to clean the hardwood floor so that it shines with polishes.

Find more information about hardwood floors and how we can help you have the best flooring at home. This is Walk On Wood, the right place to seek superior hardwood floors.

Having an aquarium is a good idea to deal with anxiety. In addition, they recommend it to stimulate the sense of responsibility of the boys.

Having a pet brings many benefits, in addition to stimulating responsibility, habits and empathy. Dogs and cats are the most common choices, but what if we consider a fish? Although its benefits are many, you must pay close attention to your needs.

Experts say “thanks to the fish, children acquire responsibilities such as food and care at an early age.” And they add: “Aquariums have become an excellent option to stimulate their capacity for empathy, recognizing that others also have needs that differ from their own.”

Interestingly, unlike cats and dogs, the fish itself will not demand attention or require personal care. Energy should be directed to maintain its properly conditioned place. It is recommended that the fish tank be rectangular because it facilitates the maintenance of the fish. Acquiring a good filter will be key to keeping the water clean, as well as a heater and thermometer to monitor the temperature of the new fish habitat.

Remember that Guppy’s Aquarium Products is the top online shop where you can buy anything you need for your aquarium from the comfort of your house and have the most remarkable and eye-catching fish tanks.

Do you live in an apartment? Definitely the best pet option for you

Part of the appeal of a fish tank is the color. Therefore, decorating it can contribute to enjoyment. It is recommended to add gravel to later accommodate the accessories and plants, which can be artificial or real, and which will beautify the aquarium. Remember not to leave it in direct sunlight for a long time to avoid unwanted algae growth.

A well-established aquarium helps and calms boys suffering from hyperactivity and behavioral disorders. It stimulates habits and responsibility because they force to comply with feeding times and cleaning regimen. And the sound of the water, the colors and movements of the fish are an excellent anti-stress.

Fish, the first ideal pet for children

Having fish at home can bring great benefits for children and people with stress, addicts and the elderly.

If you are looking for the first pet for your home, fish could be the best option, as it turns out that these animals directly benefit children, who take responsibility and learn to love animals. Fish farming is used as therapy in rehabilitation centers, in care centers for people suffering from diseases such as leprosy and even with the elderly.

In the case of people with addictions, fish farming helps to learn something new and make hospitalization and hours spent in rehabilitation centers less intense. And for the sick and the elderly, it is a way of feeling still useful to society, so that it increases self-esteem and develops more self-confidence.

What are the advantages of having fish at home?

1. They don’t make noise
2. They don’t litter the house
3. They don’t need any training
4. They are not expensive
5. They give peace of mind
6. They don’t need a lot of space

If you have dared to have fish as a pet, here are some tips.

1. Choose. There are freshwater fish, ideal for beginners, and tropical water. Ideally, you should choose the ones that are small in size because they are easier to care for and require less care.
2. The aquarium you buy must have the capacity to comfortably accommodate the fish, so that they feel as in their natural habitat. For example, a 2.5-centimeter fish needs a 4.5 liter water.
3. The aquarium should be placed out of direct sunlight and noise. The temperature is not important, because it will be regulated from inside your new home.
4. It is very important to regulate the temperature of the aquarium with a thermostat, since the fish need a climate that oscillates between 22 and 28 degrees Celsius.
5. Another important element is the filter, which will avoid having to clean the aquarium every two days, but it will be necessary to change it every month and remove with a soft sponge the dirt that accumulates on the crystals.
6. It will also be necessary to make a kit to measure the pH of the aquarium once a week.
7. Regarding food, fish only need to be fed once a day and in small amounts.

As you can see, fish are simple animals to care for that do not require too much attention, but that can give you more than you think.

The initial treatment of the space is of vital importance

Clean the aquarium very well, without any toxic product that can leave residues.

Place the filter.

In the event that you have opted for a hot water aquarium, place the thermometer.

Put the gravel in the bottom of the aquarium.

Fill it with water: The first time, you can put tap water since in the first fill you are not going to put the fish directly but you are going to treat it so that they can live in it. To do this, you will have to buy bacteria known as nitrifying bacteria, which are responsible for eliminating the harmful substances contained in the water. These bacteria will take 4 weeks to do their job.

Light is essential for life

Fish need light to survive, although it does not necessarily have to be sunlight. We recommend that you buy a fluorescent light that simulates natural light since it is not advisable for sunlight to shine directly on the fish tank.

Fish must be friends

Although your fish tank is very large, not all fish get along with each other. Many times they are aggressive towards each other, for this reason we recommend asking the store manager in advance.

Remember that if you are looking for an online shop where you can buy anything you need for your aquarium from the comfort of your house, here at Guppy’s Aquarium Products you will find them.

 

When you are going to buy a new kitchen, you have to take into account different factors. One is the choice of furniture that identifies with your decorative tastes, but it is also essential to determine the type of lighting for the kitchen in the kitchen design process.

Depending on the decorative style you want to use in the furniture, the size of the kitchen, the color of the wall and your type of floor, the right lighting is combined. Planning these points well is necessary to achieve the kitchen of your dreams.

Here in Australia you will find a top provider of lighting solutions with a wide range of imported lighting products. Select Lighting is your leading option to purchase LEDs in Australia.

Light effect differences between light and dark furniture

Today you can find a lot of information for decorating a kitchen, but always, having the help and advice of a professional expert in kitchen design is ideal for discovering new possibilities and learning about the latest trends.

The choice in the color of the kitchen furniture will influence the lighting. To understand it well, it is as simple as knowing a little about the theory of light and color:

A basic rule of thumb is that dark colors, whether on furniture, wall and floor, makes the room look smaller. For these cases it would be necessary to have a good luminosity to compensate for the loss and absorption of light.

On the contrary, light or whitish tones will generate great amplitude. It is ideal for small spaces if you want to visually gain more size. Lighter colors help reflect light.

Useful tips on lighting a kitchen

If you want a lot of light in the kitchen, the white lacquered furniture and materials such as steel and glass reflect the lights and increase clarity by bouncing the light.

The neutral wall colors (white and gray) accentuate the furniture, giving character to the room and standing out from other decorative elements.

The dark colors in the furniture give a feeling of intimate and cozy atmospheres. And the light colors of cleanliness, balance, calm … Everything according to your tastes!

If you like color, don’t stop yourself. The colored furniture gives freshness in the kitchen. They break with monotony and give personality. Find a balance when placing them. Create contrasts between walls and furniture.

The best lighting you can use during the day is natural light. What do we do if we don’t have natural light? To increase clarity the best option is to choose furniture with light tones.

For artificial light, create light spots depending on the use you want to give your kitchen. Combine general lighting with spotlight spotlights. For functional lighting use lights on the counter. Everything in sight! Use lights in your drawers, cabinets, and auto-start pantries.

LED as an essential part of your kitchen lights. Their great advantages over traditional light bulbs and low energy consumption make them indispensable. High efficiency, long life / service life, maintenance-free, high light quality, almost no heat emission, instant ignition, no ultraviolet or infrared emission, etc.

Combine different shades of light. The recommended temperature for functional areas is neutral light of 4000K and for warmer spaces, 3000K.

Create spaces with ambient light. Get a comfortable space with wall lights. In addition to giving an extra point of light, it has a high decorative value.

5 ideas to light up a modern living room

If you have come this far, surely you have to light up a modern living room and as you have surely heard, one of the key factors that give your house its own personality is lighting, there is no doubt about that.

Not only the furniture and small accessories will make each room a special place, but the way of lighting each corner is crucial when it comes to giving the spaces the final touch. In this case we are going to deal with what is possibly the most “important” room in our house, the living room.

You know, you don’t have to change your house completely to give it a new air. By following our ideas to light up a modern living room, you will surely succeed.

1. Lighting a “small” and modern living room

The first trick is aimed at tiny classrooms. Those where you still dodge (or collide, in the case of the highest members of the family) with that old ceiling lamp with glass lampshades.

What if you exchange it for a modern ceiling light? This is going to make it look spacious, making your living room look much bigger than it is. In addition, most of these modern living room lamps already use LED technology, so you will also notice the change in the electricity bill thanks to the savings.

2. Living room lamps that are “sculptures”

The second idea that we give you is to choose modern living room lamps with a double function: to illuminate and to decorate.

What you just read. Today, living room lamps are not only functional, they also seek to play an aesthetic role. The living area is where we usually receive visitors, so it is the ideal place to give a nice and different touch of light.

3. Lamps that adapt to the modern style of your living room

The following idea has a clear purpose: stop works. If you have relocated some furniture in your living room and now the dining table is no longer centered with the ceiling lamp, do not suffocate yourself thinking about making more holes or how to “hide” the one you already had. The solution is much simpler and more practical than you think: the articulated lamps for offset light point.

These are useful pendant lamps that, thanks to one or two articulated arms, are easily movable. Some have a capacity of more than one meter of displacement from their point of light.

Here at Select Lighting we take pride in providing you with premium lighting solutions that are not only very functional but also visually appealing.